Bobr
del.icio.us
digg
facebook
Furl
Google
Memori
Mister Wong
News2
reddit
Slashdot
StumbleUponActiveSync via Wi-Fi
Материал из PDA Prime_wiki
Содержание |
Часть 1. PC
Произведем настройки PC.
”Откройте сетевый подключения” или выполните Пуск -> Выполнить... -> ncpa.cpl
--
Then select you WLAN card and open the “Properties” tap. Выберите Ваш беспроводной адаптор и нажмите "Свойства"
--
Select the “Internet Protocol (TCP/IP)” and click the “Properties” tap. Выберите "Протокол TCP/IP" и нажмите "Свойства"
--
If you are using a Router or a Server you are connecting to do not modify you settings. I’m using a hard code IP address because of my home network configuration. You may click now the “Advanced…” button
--
in the “Advanced…” tap click the "Wins" nail.
--
It is very important that you are use the “NetBIOS” as the sync is using it to identify your PDA If you are using DHCP leave the default setting. I recommend you to change to “Enable NetBIOS over TCP/IP” Click “OK” button to accept the changes.
- we will get to this point later on in the PDA part of the tutorial
--
will need my computer name later on and here how to obtain it. Use the short cut “windows button + break” or type in "MS-DOS" prompt “C:\>hostname” as you can see my computer name is “k7n”.
--
PDA Part I
Click the "Start" then selct "Settings" Then click on the "System" nail.
--
--
The default name that the PDA has (HP 2210) is “Pocket_PC” and I can tell you the “NetBIOS” don’t like this one.
The default name that the PDA has (HP 2210) is “Pocket_PC” and I can tell you the “NetBIOS” don’t like this one.
--
ComputerPart II
After you made all this we have to setup a partner ship with the PDA. It is composer to do it over a conventional type of connection (IR, Serial or USB)
- I haven’t found a way to bypass this step yet.
Connect the PDA to the cradle and perform a standard partnership setup. Click next
--
Live the default option “Synchronize with this desktop computer” then click next
--
Make you selection as you do it usually. I’m synchronizing only the calendar.
--
After the Partner ship is made and the PDA is been synchronized for the very first time. Click the “File” menu and select the “Connection Settings…
--
The most important is that you enable the “Allow network (Ethernet) and Remote Access Service (RAS) server connection with this desktop
PDA Part II
After the First Sync we can go back to the PDA and just check some of the options there.
Click the “Start” then select the “ActiveSync”.
Normally you can hit the “Sync” button and if you have completed all the steps in the beginning of the tutorial you will be able to synchronize. Else check the “Tools” then “Options…” there may be needed some final settings to setup.
--
t is compulsory the name of your wireless PC that you have established the partner ship is selected in the drop down list. Check you name. Take a look at the “Options…
--
Hereby the default “Options…”setting. Leave the as they are or change if needed “When cradled” - used only wire connected “Maintain connection” - will flat you battery very rapidly :) “Disconnect when done” - is recommended
